Reversible
crushing mill suitable
for abrasive materials, pebbles, granite, quartz, etc. in addition to
limestones and assimilated.
Specially designed for producing sands with a sand content as high as 80%. With a special attachment for making sands and gravels in such proportion as each case may require. All those features are common to models JLT 750, 500, 1000 and 350.
Specially designed for producing sands with a sand content as high as 80%. With a special attachment for making sands and gravels in such proportion as each case may require. All those features are common to models JLT 750, 500, 1000 and 350.
 |
 |
|
MODEL
|
MAJOR
FEATURES
|
MOUTH
(mm)
|
MAX. FED MATERIAL SIZE (mm)
|
POWER
(Kw)
|
MACHINE
WEIGHT (Kg)
|
OUTPUT
(T/h)
|
|
JLT-750
|
5
- BARRONES
|
750
X 600
|
150
|
200
|
13.000
|
150
|
 |
|
|
|
|
|
|
SPECIFICATIONS
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
 |
 |
|
MODEL
|
MAJOR
FEATURES
|
MOUTH
(mm)
|
MAX. FED MATERIAL SIZE (mm)
|
POWER
(Kw)
|
MACHINE
WEIGHT (Kg)
|
OUTPUT
(T/h)
|
|
JLT-500
|
3
- BARRONES
|
500
X 250
|
70
|
160
|
6.200
|
80
|
|
|
|
|
|
|
|
SPECIFICATIONS
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
|
|
|
MODEL
|
MAJOR
FEATURES
|
MOUTH
(mm)
|
MAX. FED MATERIAL SIZE (mm)
|
POWER
(Kw)
|
MACHINE
WEIGHT (Kg)
|
OUTPUT
(T/h)
|
|
JLT-1000
|
3
- BARRONES
|
1000 X 250
|
70
|
200
|
8.800
|
125
|
|
|
|
|
|
|
|
SPECIFICATIONS
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-abrasion material, and their ease of handling facilitates their replacement. They are held in place by a wedge adjusted externally against the frame.
IMPACT PLATE CARRIER: Made of very thick rolled steel plate, welded and ribbed at the rear, making it a single part.
IMPACT PLATES: Supplied with high chrome content anti-wear lining plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT BARS: The specially designed wheel is equipped with lengthwise housings for housing the 5 side fitted impact or breaker bars. These are made of high chrome content material and have two positions on the wheel for maximum efficiency. The bars are retained laterally by pins.
LOWER IMPACT PLATES: The JLT series crushers are specially designed to recover the maximum amount of fines (sand), in some cases reaching up to 85%.
 |
 |
|
MODEL
|
MAJOR
FEATURES
|
MOUTH
(mm)
|
MAX. FED MATERIAL SIZE (mm)
|
POWER
(Kw)
|
MACHINE
WEIGHT (Kg)
|
OUTPUT
(T/h)
|
|
JLT-350
|
2
- BARRONES
|
500
X 250
|
50
|
90
|
4.000
|
60
|
|
|
|
|
|
|
|
|
JLT-400
|
3
- BARRONES
|
500
X 250
|
50
|
90
|
4.500
|
70
|
|
|
|
|
|
|
|
SPECIFICATIONS
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-wear material, and their ease of handling facilitates their replacement.
IMPACT PLATES: These are high chrome content anti-wear plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT OR BREAKER BARS: The specially designed wheel is equipped with lengthwise housings for housing the 2 side fitted impact or breaker bars. These are made of high chrome content material and have 4 positions on the wheel for maximum performance. The bars are retained laterally by pins.
FRAME: Made of strongly welded and ribbed rolled plate. For quick changing of the wear components, this machine has 4 side doors, 2 on either side to allow easy access.
SIDE WEAR LININGS: These have the minimum number of parts to avoid replacement problems. They are made of high chrome content anti-wear material, and their ease of handling facilitates their replacement.
IMPACT PLATES: These are high chrome content anti-wear plates which are machined in the mounting area. They are held in place by 8G bolts, as the plates come with their own foundry thread.
IMPACT OR BREAKER BARS: The specially designed wheel is equipped with lengthwise housings for housing the 2 side fitted impact or breaker bars. These are made of high chrome content material and have 4 positions on the wheel for maximum performance. The bars are retained laterally by pins.